Stránka 4 z 22

Re: MSI Afterburner - info a vše okolo

Napsal: ned 6. úno 2011, 21:36
od R0mi
Cau Krteq :) Prosim ta mam taky problem vzdy ked nastavim fan control v MSI AB tak po rr pc sa mi vzdy chladic roztoci na 50% a neviem preco aj ked mam nastavenych len 30 mam tam zapnute aj aplikovanie danych nastaveni po spusteni pc ale vkuse to ide na 50% ked to nastavim v trixxe nerobi to problem len v AB
Proste vobec sa to neaplikuje po rr takty aj vcore idu ale fan speed bud ide na 50% alebo na 25% ako je nastaveny na default
Nikto nema tento problem vzdy musim ist do AB a dat tam ze apply aby sa to aktivovalo
Hm tak uz asi nic uz to nerobi :-D

Re: MSI Afterburner - info a vše okolo

Napsal: ned 6. úno 2011, 22:35
od Jindy
Krteq: Jde tedy už nějak vynutit podtaktování ve 2D při více monitorech?

Re: MSI Afterburner - info a vše okolo

Napsal: ned 6. úno 2011, 22:48
od Krteq
Ne, to je řízeno PowerPlay :(

Re: MSI Afterburner - info a vše okolo

Napsal: ned 6. úno 2011, 23:46
od Jindy
To mě vážně se*e :( A cos tedy myslel tím podtaktováním ve 2D?

Já pro 2D v Afterburneru dělám akorát to, že snížím maximální povolené takty na 605 MHz / 935 MHz, takže alespoň nedovolím, aby občas při vytížení skákaly takty na 810 MHz / 1250 MHz, nebo víc. Ale samozřejmě bych rád, aby to šlo mnohem víc podtaktovat

Když už ne snížit minimální takty pro multimonitor, tak aspoň co nejvíc omezit ty maximální povolené, třeba až na úroveň minimálních.

Je aspoň způsob, jak omezit maximální takty řekněme na těch 350 MHz?

Re: MSI Afterburner - info a vše okolo

Napsal: pon 7. úno 2011, 00:06
od R0mi
Tym je myslene 2D takt cize vo wine by si mal mat 250/150 ale tym ze v starsom AB si prepisal config z 0 na 1 a umoznil neoficilane takty nad 840/1325 tak nesiel 2D takt
Ak mas 2 monitory tak samozrejme 2D takt je iny neviem presne kolko

Re: MSI Afterburner - info a vše okolo

Napsal: čtv 24. úno 2011, 14:52
od Krteq
MSI Afterburner 2.1.0 (2011-02-15)
Changelog
  • Added AMD Barts and Cayman graphics processors family support
  • Added core voltage control for reference design AMD RADEON 6970 graphics cards with CHL8228 voltage regulators
  • Added core voltage control for reference design AMD RADEON 6970 graphics cards with VT1556 voltage regulators
  • Added core voltage control for reference design AMD RADEON 6950 graphics cards with CHL8214 voltage regulators. Please take a note that voltage control is not supported on AMD RADEON 6950 graphics cards flashed with AMD 6970 BIOS
  • Added core voltage control for reference design AMD RADEON 6950 graphics cards with VT1556 voltage regulators. Please take a note that voltage control is not supported on AMD RADEON 6950 graphics cards flashed with AMD 6970 BIOS
  • Added core voltage control for reference design AMD RADEON 6870 graphics cards with CHL8214 voltage regulators
  • Added core voltage control for reference design AMD RADEON 6850 graphics cards with CHL8214 voltage regulators
  • Added core voltage control for reference design NVIDIA GeForce GTX 580 series graphics cards
  • Added core voltage control for reference design NVIDIA GeForce GTX 570 series graphics cards
  • Added core voltage control for reference design NVIDIA GeForce GTX 560 Ti series graphics cards
  • Added core voltage control for reference design NVIDIA GeForce GTX 550 Ti series graphics cards
  • Added core voltage control for reference design NVIDIA GeForce GTX 460 SE series graphics cards
  • Added delayed fan speed readback mechanism to improve compatibility with fan control on GeForce GTX 580 series
  • Added low-level fan tachometer monitoring for RV7xx and newer AMD graphics cards using on-die GPU tachometer
  • Fixed low-level memory clock monitoring for some mid-range AMD RADEON 5xxx series graphics cards using QDR control related power saving technologies
  • Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N465GTX Twin Frozr II Power Edition series graphics cards with uP6218+uP6262 voltage regulators
  • Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N450GTS Cyclone Power Edition series graphics cards with uP6262 voltage regulators
  • Added core voltage control for custom design MSI N450GT DDR5 series with uP6262 voltage regulators
  • Added core and memory voltage control for custom design MSI N430GT and N420GT series with uP6262 voltage regulators
  • Fixed typo in hardware database causing regular MSI N470GTX and MSI N470GTX Twin Frozr II graphics cards to be detected as MSI N470GTX Twin Frozr II Power Edition series and causing voltage control to be locked
  • Added I2C bus index filtering in uP6262 voltage regulators detection code to prevent voltage regulator detection conflicts with DDC on the systems with some specific monitor models. The conflicts resulted in displaying fake +10/+20/+30 voltages on MSI GeForce N460GTX Hawk series
  • Added power user oriented configuration file switch for adjusting retry counter for external I2C voltage regulators detection. Retry counter is set to 3 by default
  • Fixed issue in the context help system causing it to display wrong floating tooltips when hovering cursor over the controls under certain conditions
  • Added ability to assign a hotkey for toggling the On-Screen Display Server blocking. This hotkey is aimed to provide a simple way for diagnosing the server related compatibility issues
  • Changed default fan speed curve for user defined software automatic fan speed mode
  • Now MSI Afterburner uses previously undocumented power user oriented DirectInput based hotkey handler. New hotkey handling mechanism drastically reduces hotkey response time in applications heavily loading CPU. Please take a note that new sophisticated hotkeys handling can cause some system security applications (e.g. KIS proactive defense module) to warn you about possible keylogging threat
  • Fixed issue in hotkey handler causing it to detect false keystrokes under certain conditions
  • MSI On-Screen Display server has been upgraded to version 4.0.1. New version gives you the following improvements:
    • Reduced On-Screen Display rendering related CPU performance hit due to more effective geometry batching in On-Screen Display 3D rendering mode codepath
    • Now MSI On-Screen Display server supports RivaTuner's user extendable localization system
    • Screenshot compression library SaveImage.dll has been replaced with more progressive
    • SaveMedia.dll library providing unified screenshot and video encoding engine
    • JPEG screenshot quality settings are no longer power user oriented and can be adjusted directly from the client application GUI
    • Screen capture implementation is now multithreaded to minimize the impact on the game performance when saving screenshots on the systems with multicore CPUs
    • Text indication of screen capture events in the On-Screen Display has been replaced with graphics progress indicator
    • Fixed issues causing the On-Screen Display to be rendered in wrong colors in 3D mode in some multitextured Direct3D9 applications (e.g. several bumpmapping related samples from DirectX 9 SDK)
    • Updated profiles list
  • Added high performance realtime in-game video capture support by means of built-in video capture engine of new MSI On-Screen Display server. You no longer need to waste your money on purchasing an additional video capture application, now MSI Afterburner is providing such functionality to everyone and absolutely for free! The key features of video capture engine are:
    • Realtime video capture support for any Direct3D8, Direct3D9, Direct3D10, Direct3D11 and OpenGL applications
    • Queued frame capture algorithms are aimed to minimize the graphics pipeline stalling caused by transferring pixel data from GPU to CPU and keep high and smooth in-game framerate while video capture is in progress
    • Multiple video capture formats: uncompressed video capture for the systems with high performance disk I/O subsystems, two different compression modes for the systems with both mid-range and high performance multicore CPUs
    • Multithreaded SIMD optimized encoders are aimed to provide the maximum compression performance on modern multicore CPUs with SSE2 instructions support
    • Various options allowing you to tweak video capture performance on your system: customizable target video framerate, customizable target video quality, controllable multithreaded optimization and various frame downsampling modes
    • Audio stream capture and additional video capture related enhancements are coming in future versions
  • Now screen capture events are also indicated by notification messages in the hardware monitoring window
  • Added option allowing hiding On-Screen Display on captured screenshots and videos
  • Reduced hardware polling time on multi-GPU systems due to cached GPU context switching in hardware monitoring module
  • Improved hardware monitoring shared memory layout v2.0 introduces additional data source identification related fields and new GPU descriptors array. Third party developers may refer to updated sample code included in the SDK
  • Added new control shared memory interface for future MSI software products integration with MSI Afterburner. New shared memory interface allows third party applications to program graphics card clock freqnecies, voltages and fans via MSI Afterburner. Such shared memory interface allows developing a lot of useful external applications, for example smartphone overclocking client applications connected to the PC server and remotely controlling the hardware via MSI Afterburner and so on. The SDK included in MSI Afterburner distributive contains open source sample demonstrating the access to new control shared memory from a third party application
  • All synchronization mutexes have been moved from local to global namespace
  • Now Microsoft Visual C++ 2008 runtime libraries are included in distributive and installed with software
  • Hardware database is now configured to force fan duty cycle monitoring to be performed less efficient AMD ADL SDK path on AMD RADEON 4870 X2 and HD 5970 series graphics cards
  • Changed way of unlocking unofficial overclocking on AMD graphics cards
  • Added alternate unofficial overclocking path allowing keeping PowerPlay active on some modern ASIC families during overclocking
  • Fan control settings are now being forcibly reapplied after changing the clocks via unofficial overclocking path to bypass bug in AMD driver causing the fan control settings to be reset to defaults during programming PowerPlay table
  • Fixed issue in uP6266 voltage control codepath causing setting wrong fixed 0.920V voltage instead of desired one when "Force constant voltage" option is enabled
  • Localization reference guide documentation has been updated to v1.2
  • Various typo fixes in different language packs
Stahujte:
MSI Afterburner 2.1.0 Setup
(.ZIP; ~24,7 MB - včetně MSI Kombustor)

Re: MSI Afterburner - info a vše okolo

Napsal: čtv 24. úno 2011, 18:34
od Jindy
No teda, parádní update. Ve spojení s Catalyst 11.2 driverem konečně funguje jádro na pouhých 250 MHz i při 4 monitorech! Paměť se mi podařilo omezit na max 625 MHz, ale nevím, proč nejde maximální takt jádra donutit až na 405 MHz, kam jde ten posuvník stáhnout. Když to aplikuji, tak posuvník skočí na maximálně 500 MHz, níž už jít nechce. Netušíte někdo proč?
Já tedy myslím, že je to asi omezením ze strany driverů / biosu karty, prostě si to jistí a nedovolí Afterburneru jít níž, jak už jsme rozebírali jinde.

No a co Core Voltage? Mám se odvážit s tím hýbat? Nechal jsem ten posuvník nastavený defaultně na 1112 mV a bojím se na to sahat. Co by se mohlo stát, kdybych ho taky stáhnul na minimum? A taky nevím, jestli bych neměl aplikovat volbu "Force constant voltage".

A jinak, myslíte si, že je 65°C v klidu při tomhle nastavení s 0% otáčkami ventilátoru je na 6950 2GB ok teplota pro dlouhodobé provozování?

Re: MSI Afterburner - info a vše okolo

Napsal: čtv 24. úno 2011, 22:45
od tielka
u tohoto Afterburneru 2.1.0 jde nahrávat i video u her ale když to video pustím nejde zvuk

Re: MSI Afterburner - info a vše okolo

Napsal: stř 9. bře 2011, 21:20
od dohnalik
Takže na HD6950, které mají BIOS z HD6970, nepůjde přes afterburner měnit napětí jádra?

Re: MSI Afterburner - info a vše okolo

Napsal: stř 9. bře 2011, 22:29
od Krteq
Co takhle se podívat o stránku zpět :) -> http://pctforum.tyden.cz/viewtopic.php? ... 9#p8109389

a možná se ti bude hodit i tohle -> http://pctforum.tyden.cz/viewtopic.php? ... 3#p8120793

Re: MSI Afterburner - info a vše okolo

Napsal: stř 9. bře 2011, 22:55
od Yiri
Pro všechny, co chtějí zvýšit rozsah taktů!

Jelikož mám nějakou dobu 8800GT, která nedisponuje technologií HybridPower, musel jsem řešit podtaktování pomocí afterburneru. Rozsah tam není moc velký a tak jsem googlil, až jsem našel jak na to.

1) Ze složky \MSI Afterburner\ odstranit soubor MSIAfterburner.dat (pro jistotu si jej zálohujte)
2) Stáhnout modifikovaný MSIAfterburner.dat od overclockera shamino (zabaleno v příloze)
3) Upravit v tomto souboru rozsahy dle libosti
4) Nakopírovat do složky \MSI Afterburner\
5) Hotovo!


Odzkoušeno na MSI Afterburner v2.1.0

Taktujete na vlastní riziko, za případný zničený HW neručím!

Původní diskuze:
http://www.xtremesystems.org/forums/sho ... p?t=261143

Re: MSI Afterburner - info a vše okolo

Napsal: stř 16. bře 2011, 21:55
od fofrboy
Krteq píše:Info pro uživatele novějších karet AMD/ATi, kteří chtějí taktovat nad limit OverDrive, ale při tom chtějí zachovat podtaktování ve 2D:
  1. Otevřete soubor Afterburner.cfg, vyhledejte řetězec "UnofficialOverclockingEULA" a za rovnítko vložte tento text (bez uvozovek) - "I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it"
  2. V témže souboru zapište u řetězce "UnofficialOverclockingMode" za rovnítko buď
    • "1" pro bypass OveDrive limitu při zachování podtaktování ve 2D
    • "2" pro totální ignorování PowerPlay stavů (karta poběží stále na plných frekvencích)
Funguje pouze pro verzi Afterburneru 2.1.0 BETA 7 a vyšší.
Díky moc,tohle mi moc pomohlo! :D Nevíš ještě prosim tě,kde se nastavuje,aby mi to při hře ukazovalo počet FPS?Údajně by to mělo jít někde zapnout.

Re: MSI Afterburner - info a vše okolo

Napsal: stř 16. bře 2011, 22:54
od Krteq
Tlačítko "Settings", záložka "Monitoring" a u požadovaných prostředků zatrhnout políčko "Show in OSD Display". Měl by se spustit OSD Statistic Server a v liště by se měla zobrazit jeho ikona. Potom už si můžeš doladit maličkosti.

Re: MSI Afterburner - info a vše okolo

Napsal: úte 22. bře 2011, 12:28
od Krteq
MSI Afterburner 2.2.0 BETA1 (2011-03-22)
Changelog
  • Added core voltage control for reference desing AMD RADEON 6990 graphics cards with VT1556 voltage regulators
  • Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N560GTX-Ti Hawk series graphics cards with uP6218+uP6262 voltage regulators
  • MSI On-Screen Display server has been upgraded to version 4.2.0. New version gives you the following improvements:
  • Added audio capture support to video capture engine. The engine supports stereo audio capture under Windows XP and both multichannel or downmixed stereo capture under Windows Vista and newer operating systems
  • High-performance primary desktop video capture support for Windows XP and newer operating systems. Please take a note that currently desktop video capture is not supported under Windows Vista and newer operating systems with Aero Glass interface is enabled, please select classic interface to get it working if necessary (Aero Glass interface is now being automatically disabled by server when desktop screen capture is started and restored after finishing the capture.)
  • Updated profiles list
  • Changed current value and time rendering Z-order in hardware monitoring graphs renderer
  • Added Simplified Chinese localization
To enable unofficial overclocking in this version it is necessary to:
  • Set UnofficialOverclockingEULA field to the following text: I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
  • Set UnofficialOverclockingMode to 1 to keep PowerPlay active (may not work on old ASICs), 2 to traditionally disable PowerPlay or to 0 to temporary disable unofficial overclocking path
Stahujte:
MSI Afterburner 2.2.0 BETA1 Setup
(.ZIP; ~6,7 MB)

Re: MSI Afterburner - info a vše okolo

Napsal: pon 28. bře 2011, 19:52
od l.zdvorak
zdravim lidi jen se chci zeptat mam Asus EAH6970 DCII a msi afterberner mi neukazuje zvyseni voltage na jadru a mam to vsechno zaskrtnuty v nastaveni proc mi to neukaze diky?

Re: MSI Afterburner - info a vše okolo

Napsal: pon 28. bře 2011, 22:24
od Krteq
Krteq píše:Info pro uživatele novějších karet AMD/ATi, kteří chtějí taktovat nad limit OverDrive, ale při tom chtějí zachovat podtaktování ve 2D:
  1. Otevřete soubor Afterburner.cfg, vyhledejte řetězec "UnofficialOverclockingEULA" a za rovnítko vložte tento text (bez uvozovek) - "I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it"
  2. V témže souboru zapište u řetězce "UnofficialOverclockingMode" za rovnítko buď
    • "1" pro bypass OveDrive limitu při zachování podtaktování ve 2D
    • "2" pro totální ignorování PowerPlay stavů (karta poběží stále na plných frekvencích)
Funguje pouze pro verzi Afterburneru 2.1.0 BETA 7 a vyšší.
Tuhle úpravu jsi provedl?

Mimochodem, ten posuvník nereaguje na zvýšení napětí, nebo je zašedlý a nejde s ním vůbec hnout?

Re: MSI Afterburner - info a vše okolo

Napsal: úte 29. bře 2011, 07:11
od l.zdvorak
Tuto upravu sem neprovedl skusim to a posuvnik je zeliny a nejde snim hnout a kde to ukazuje kolik je tam stavy to je taky zeleny a nic v ty kolonce.neni

Re: MSI Afterburner - info a vše okolo

Napsal: úte 29. bře 2011, 09:36
od Krteq
Byl by screenshot?

//Aha, tak ASUS používá na DirectCU2 odlišné PCB s jiným, Afterburnerem nepodporovaným, regulátorem. Pokud budeš chtít přidávat napětí pro GPU, budeš muset použít program ASUS Smart Doctor.

Re: MSI Afterburner - info a vše okolo

Napsal: úte 29. bře 2011, 16:12
od l.zdvorak
hm ten mi nejak zlobi prave :sad:

Re: MSI Afterburner - info a vše okolo

Napsal: úte 29. bře 2011, 16:23
od Krteq
Tak to máš peška :(