MSI Afterburner + RTSS - info a vše okolo

Testování výkonu a stability PC, výsledkové listiny bechmarků.

Moderátor: Don

Odpovědět
spajdr
Středně pokročilý
Středně pokročilý
Uživatelský avatar
Registrován: 14. bře 2004
Bydliště: Ostrava Poruba
Kontaktovat uživatele:

MSI Afterburner + RTSS - info a vše okolo

Příspěvek od spajdr »

Oficiální stránky programu MSI Afterburner (cz):
https://cz.msi.com/Landing/afterburner
Obrázek


MSI Afterburner v.1.2.0 (2009-10-12)
- Add voltage adjustment of ATI Radeon HD 5870 and 5850
- Added NVIDIA G 210 and GT 240 series graphics cards support
- Added voltage control for custom design MSI N220GT and N240GT series graphics cards with uP6262 voltage regulators
- Added intitial AMD RADEON HD 5750 and AMD RADEON HD 5770 series graphics cards support
- Added Logitech keyboards LCD displays support. Now it is possible to display hardware monitor data in Logitech keyboards LCD
- Extended I2C address scanning range for uP6208 voltage regulators to allow supporting voltage control on non-MSI custom design graphics cards equipped with uP6208
- Fixed on-board memory size detection for AMD RADEON HD 5000 series graphics cards
- Now option also affects voltage control
- Fixed database entry for AMD RADEON HD 4890 series graphics cards. Afterburner no longer adjusts 2D voltage instead of 3D voltage on AMD RADEON HD 4890
- Fixed database entry for AMD RADEON HD 5850 series graphics cards. Afterburner no longer adjusts UVD voltage instead of 3D voltage on AMD RADEON HD 5850
- Automatic profiles manager is now restarted after resuming from suspended mode
- Revised VRM access synchronization protocol for safer simultaneous VRM polling by multiple software products at the same time
- Added setting to the context menu of detached hardware monitor window. When this option is disabled, hardware monitor window can be minimized to the taskbar while staying in detached mode
- Now it is possible to pause hardware monitor activity via option in the context menu of hardware monitor window
- Maximum allowed hardware polling period has been extended from 5 to 60 seconds
- Added configuration file setting allowing power users to display performance profiler status informaition in the hardware monitor window. The information allows estimating average CPU performance hit caused by hardware monitor and software automatic fan control layers
- Optimized timer message queue processing under high CPU load conditions for better hardware monitoring and software automatic fan control events handling
- Reduced CPU usage for simultaneous GPU clock frequency and GPU usage readings on AMD graphics cards, both values are being read in single pass now
- Maximum limits has been extended from 1000 to 1500MHz for core clock graph and from 2000 to 2500MHz for shader clock and memory clock graphs
- Added readme file and option to display it in the installer
- Now tab is not displayed in advanced settings window if there are no fan control capable GPUs in the system
- Updated context help files, added more hints to button help

http://event.msi.com/vga/afterburner/im ... tup120.zip


//Hladis edit 23-3-2019
Naposledy upravil(a) Hladis dne sob 23. bře 2019, 15:35, celkem upraveno 6 x.
Důvod: Úprava názvu vlákna
barco
Středně pokročilý
Středně pokročilý
Uživatelský avatar
Registrován: 22. čer 2006
Bydliště: Európska únia

Re: Afterburner v.1.2.0 (2009-10-12)

Příspěvek od barco »

Jednoduchšia verzia RivaTuner-u, no premňa konečne použiteľná. eVGA Precison ani Zotac Nitro mi nevyhovovali, no Afterburner je iná káva. Jednoduchá obsluha, všetky potrebné položky ihneď k dispozícii, možnosť meniť napätie veľmi jednoducho, nice. Jediná chyba a to že na mojej Gigabyte GTX280 nezobrazuje teplotu, vôbec v ňom nemám záložku Temperature. V Rive všetko funguje ako má ...
.
DEVastor
Začátečník
Začátečník
Uživatelský avatar
Registrován: 27. úno 2007
Bydliště: Zlín
Kontaktovat uživatele:

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od DEVastor »

Obrázek
spajdr
Středně pokročilý
Středně pokročilý
Uživatelský avatar
Registrován: 14. bře 2004
Bydliště: Ostrava Poruba
Kontaktovat uživatele:

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od spajdr »

Pár lidí z guru3d fóra píše že jim při používání afterburner skočila voltáž z 1.2V až na 1.6V/2V
což by mohla být chyba programu, pokud to špatně ukazuje, nicméně pokud jim stoupla i teplota v idle o 20C, tak to už asi falešné hlášení nebude, takže bacha na to.
spajdr
Středně pokročilý
Středně pokročilý
Uživatelský avatar
Registrován: 14. bře 2004
Bydliště: Ostrava Poruba
Kontaktovat uživatele:

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od spajdr »

mimochodem zrovna vyšla nová verze

Afterburner v.1.3.0 (2009-10-19)
- Added voltage control for reference design AMD RADEON HD 4770 and AMD RADEON HD 5770 series graphics cards with L6788A voltage regulators
- Added voltage control for custom design MSI N240GT D3 series graphics cards with uP6262 voltage regulators
- Fixed database entry for AMD RADEON HD 4870 X2 graphics cards.
Afterburner no longer adjusts 2D voltage instead of 3D voltage on AMD RADEON HD 4870 X2


http://event.msi.com/vga/afterburner/download.htm
Comby
Začátečník
Začátečník
Registrován: 06. bře 2009

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od Comby »

Afterburner v.1.3.0 (2009-10-19)
- Added voltage control for reference design AMD RADEON HD 4770 and AMD RADEON HD 5770 series graphics cards with L6788A voltage regulators
Konečne, Smart Doctor pôjde preč, jeho nevýhoda pri 4770 bolo obmedzenie na 850/3600 a spolupráca s Overdrive (CCC) občas haprovala (pri štarte systému sa niekedy nenačítali nastavené zvýšené frekvencie).

//Edit: Smart Doctor vraciam späť, voltage control u mňa nefunguje.
spajdr
Středně pokročilý
Středně pokročilý
Uživatelský avatar
Registrován: 14. bře 2004
Bydliště: Ostrava Poruba
Kontaktovat uživatele:

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od spajdr »

Obrázek

původní skin je zbytečně velký, tady je zmenšená verze a trochu graficky upravena

http://www.mediafire.com/download.php?yjlnmefadtn
Shit
Odborník PCT
Odborník PCT
Uživatelský avatar
Registrován: 20. pro 2003
Bydliště: Hradec Králové

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od Shit »

Verze 1.4.0
Version 1.4.0

- Added initial AMD RADEON HD 5970 series graphics cards support
- Added voltage control for cost down reference design AMD RADEON HD 4870
series graphics cards with L6788A voltage regulators
- Added voltage control for custom design MSI R4770 Cyclone graphics cards
series with uP6204 voltage regulators
- Ineffective and slow temperature, clock, GPU usage and fan speed monitoring
implementation provided by native AMD's ADL SDK has been replaced with own
more effective low-level codepath. Due to new codepath hardware monitoring
related CPU performance hit has been reduced drastically on the systems
with AMD graphics cards and drivers
- On-Screen Display and Logitech LCD monitoring modules no longer explicitly
read displayed data from hardware and retrieve cached data from monitoring
graphs instead. Due to this change CPU performance hit is reduced when OSD
or LCD monitoring features are enabled
- Fan speed slider position and numeric fan speed input field are now being
refreshed in automatic fan speed mode only when MSI Afterburner window is
active
- Added configuration file switch allowing power users to unlock unofficial
overclocking codepath in AMD display drivers (similar to AMDGPUClockTool,
ATITool and RivaTuner overclocking implementation on AMD graphics cards).
Unlike AMD's official ADL SDK overclocking ways, unofficial ones are not
limited with CCC clock limit but have some alternate disadvantages (e.g.
PowerPlay support limitation).
Please take a note that unofficial overclocking methods are not supported
either by AMD or by MSI, so unlock and use it at your own risk
- Now it is possible to toggle performance profiler status info visibility
in hardware monitor window via <Show status> option in the context menu
- Fixed L6788A database entry for AMD RADEON HD 4770 series graphics cards
- GPU voltage monitoring feature is now locked and not available by default.
Unfortunately some inexperienced users don't understand the risk of running
multiple tools accessing voltage regulator at the same time and tend to use
helper voltage monitoring features in everyday hardware monitoring sessions
in conjunction with third party VRM monitoring tools, intensively writing
data to VRM and periodically causing it to enter wrong state due to write
collision. Unfortunately such issues are wrongly treated by certain users
as instability of our product. To prevent such rumors, since this version
voltage monitoring feature is no longer available to beginners by default.
Experienced users understanding these specifics and accepting these risks
may unlock voltage monitoring features via new safety option in <General>
tab
- AMD RV8xx I2C microcontroller is now being forcibly reset prior to starting
new I2C transaction to minimize the risk of I2C collisions with third party
tool without I2C synchronization protocol support (e.g. AMDGPUClockTool)
- Added safety option allowing users to disable voltage control feature if it
is not needed
- Now Afterburner forcibly changes memory clock for all performance levels at
once on AMD graphics cards with equal default memory clocks defined for all
performance levels to bypass flickering issue caused by incorrect PowerPlay
dynamic memory clock changing implementation on some cards
- Added Catalyst driver family version detection for AMD graphics cards
- Added option to display system time in the On-Screen Display
- Added red and blue editions of default skin
- Various minor user interface and skin tweaks
- Added configuration file switches allowing power users to tweak Afterburner
startup process and define startup delay or force the startup to be handled
by Windows Vista / Windows 7 Task Scheduler to bypass UAC evaluation window
(additional Microsoft Visual C++ 2008 runtime libraries installation is
required for task scheduler based startup way)
- MSI On-Screen Display server has been upgraded to version 3.6.0. New server
provides improved desktop windows notification mechanism and also features
optional power user oriented task scheduler based startup way
- Added skin format reference documentation. Now third party skin designers
may use this local offline documentation to create their own skins for MSI
Afterburner. Official MSI Afterburner skin creation contest is approaching!
Do you feel that you can design nice skins for MSI Afterburner? Stay tuned
and don't miss your chance to win the prize!
http://event.msi.com/vga/afterburner/download.htm
Stratos
Začátečník
Začátečník
Uživatelský avatar
Registrován: 05. zář 2003
Bydliště: Hvožďany
Kontaktovat uživatele:

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od Stratos »

spajdr píše:Pár lidí z guru3d fóra píše že jim při používání afterburner skočila voltáž z 1.2V až na 1.6V/2V
což by mohla být chyba programu, pokud to špatně ukazuje, nicméně pokud jim stoupla i teplota v idle o 20C, tak to už asi falešné hlášení nebude, takže bacha na to.
stejny prpblem potkal i me. neni nake info jeslti v nejnovejsi verzi 1.4 toto uz neni? defakto kvuli tomuhle sem grafiku v poslendi dobe drzel na 850Mhz max bez zvedani napeti. Bal sem se abych ji s tim 1.6V neodpalil :)
HEAD
Začátečník
Začátečník
Uživatelský avatar
Registrován: 27. lis 2005
Bydliště: Usti n/L
Kontaktovat uživatele:

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od HEAD »

Mam stejnej problem s ASUS smart doctorem-Mam nastaveno 1.3V a celkem casto se to samo prepne na 1.6v.
Ze by to byla naka chyba u vsech karet?Precijen kdyz to dela smart doctor i afterburnen je to divny.
CPU-Ryzen 7800X3D, MB-MSI X670E Tomahawk, RAM-64GB 6600mhz CL32@6400mhz CL30, GPU-Sapphire 6800XT 16GB, ZDROJ-Seasonic GX 850W, Monitor-LG OLED C1 48"
durod
Středně pokročilý
Středně pokročilý
Uživatelský avatar
Registrován: 01. úno 2005

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od durod »

HEAD píše:Mam stejnej problem s ASUS smart doctorem-Mam nastaveno 1.3V a celkem casto se to samo prepne na 1.6v.
Ze by to byla naka chyba u vsech karet?Precijen kdyz to dela smart doctor i afterburnen je to divny.
kolik je max V pro jadro? jde zvysovat napeti i na pameti?
i5 2500K, 16GB RAM, HD7750
HEAD
Začátečník
Začátečník
Uživatelský avatar
Registrován: 27. lis 2005
Bydliště: Usti n/L
Kontaktovat uživatele:

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od HEAD »

Max pro jadro co jde nastavit je 1.5V a napeti na pametech nejde zvysovat.
CPU-Ryzen 7800X3D, MB-MSI X670E Tomahawk, RAM-64GB 6600mhz CL32@6400mhz CL30, GPU-Sapphire 6800XT 16GB, ZDROJ-Seasonic GX 850W, Monitor-LG OLED C1 48"
durod
Středně pokročilý
Středně pokročilý
Uživatelský avatar
Registrován: 01. úno 2005

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od durod »

HEAD píše:Max pro jadro co jde nastavit je 1.5V a napeti na pametech nejde zvysovat.
zle jsem se vyjadril. Ja myslim spise bezpecne max. napeti....
i5 2500K, 16GB RAM, HD7750
kotas
Středně pokročilý
Středně pokročilý
Uživatelský avatar
Registrován: 29. led 2006

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od kotas »

Prosím vás o pomoc nebo o radu. Nevíte, jestli existuje nějaký program na softwarové změny napětí u grafické karty Powercollor 3870?
Zkoušel jsem i ten MSI Afterburner
Obrázek

Na ATi 3870 jsem nic nenašel, našel jsem akorát nějaké staré prográmky na změny voltáže u řady X1950, X800..
spajdr
Středně pokročilý
Středně pokročilý
Uživatelský avatar
Registrován: 14. bře 2004
Bydliště: Ostrava Poruba
Kontaktovat uživatele:

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od spajdr »

Obávám se kotasi že ta tvoje karta nemá ten správný PWM čip na změnu voltáže, proto ti to nepůjde s ničím, musel být udělat HW úpravu, nebo snad aspoň pencil mód, akorát nevím jestli to u tvojí karty půjde, pak už zbývá opravdu jenom pájení.
kotas
Středně pokročilý
Středně pokročilý
Uživatelský avatar
Registrován: 29. led 2006

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od kotas »

spajdr píše:Obávám se kotasi že ta tvoje karta nemá ten správný PWM čip na změnu voltáže, proto ti to nepůjde s ničím, musel být udělat HW úpravu, nebo snad aspoň pencil mód, akorát nevím jestli to u tvojí karty půjde, pak už zbývá opravdu jenom pájení.
Máš recht, teď jsem si něco hledal a není to tak jednoduché, takže se přes hranici 860/1260 nedostanu.. :(

//EDIT:
když už jsem to načal, tak se ještě zeptám:
- můžu si přes program Radeon Bios Editor upravit hodnoty napájení z 1,3 na 1,327 pro max a undeclocking nechat na nizsim 1,3?? Půjde to?
Krteq
Čestný člen
Čestný člen
Registrován: 22. dub 2005
Bydliště: Brno

Re: MSI Afterburner v.1.2.0 (2009-10-12)

Příspěvek od Krteq »

kotas píše:...takže se přes hranici 860/1260 nedostanu.. :(
RTF :)
Krteq píše:S HD3870 se na jádře nedostanu dál jak na 862MHz, je to normální?
Jedná se o další Bug "starších" revizí BIOSů, kdy nebylo možné dostat se přes hranici 862MHz na GPU. Tento Bug je taktéž opraven od verze 010.067.000.xxx.
Krteq
Čestný člen
Čestný člen
Registrován: 22. dub 2005
Bydliště: Brno

Re: MSI Afterburner - info a vše okolo

Příspěvek od Krteq »

MSI Afterburner 1.5.0
Changelog
  • Added video memory usage monitoring for NVIDIA graphics cards under Forceware
    185.xx and newer drivers
  • Added GPU usage monitoring for NVIDIA GT2xx and newer graphics cards under
    Forceware 185.xx and newer drivers
  • Added VGA BIOS version detection for AMD graphics cards
  • Added optional ability to display hint messages in hardware monitoring window
    area. The messages notify the user about runtime profile management activity
    (such as profile creation, removal or applying) and other application events
  • Minor appearance tweaks in default skins
  • Added compact versions of default skins (default green, red and blue editions)
  • Now advanced MSI Afterburner properties also support floating tooltip based
    context help system similar to the main application window
  • Now MSI Afterburner supports RivaTuner's user extendable localization system.
  • Currently localization system includes default English, Russian, Traditional
    Chinese, Spanish, Italian and Dutch language packs and affects context help
    system and non-skinned advanced properties interface. Similar to RivaTuner
    you can also create your own language packs for your native language and
    share your work with MSI Afterburner users community!
  • Improved skin format. Now skinned fonts support characters remapping feature.
    All skins supplied with MSI Afterburner are using this feature, third party
    skin designers may decompile and peek into these skins to see an example of
    new feature usage
  • Now hardware monitoring window font size can be redefined via the skin, third
    party skin designers may decompile and peek into compact versions of default
    skins to see an example of new feature usage
  • Skin format reference documentation has been updated to v1.1 to reflect the
    format improvements mentioned above
  • Added shared memory interface allowing any third party applications to access
    MSI Afterburner hardware monitoring statistics. The interface is intended for
    future MSI Afterburner Vista / Windows 7 sidebar gadgets, however, the shared
    memory layout is publicly open so third party developers can use it to access
    MSI Afterburner hardware monitoring statistics from their own applications.
    The SDK included in MSI Afterburner distributive contains open source sample
    demonstrating the access to shared memory from a third party application
  • Added command line switches for forcing MSI Afterburner to be minimized to the
    system tray area on startup or during runtime and for opening desired advanced
    MSI Afterburner properties tab. The switches are intended for interraction
    with future MSI Afterburner Vista / Windows 7 sidebar gadgets. Sample code
    included in the SDK also shows you how to detect, start and minimize installed
    MSI Afterburner, how to open desired tab in advanced properties and how to use
    MSI Afterburner profiles from third party applications
  • Reduced runtime skin engine memory footprint due to dynamic skin storage
    unloading
  • Startup settings are now displayed next to the <Apply overclocking at system
    startup> button
  • Added button for locking profiles modification
  • Now voltage control is also locked by default in safety options in advanced
    MSI Afterburner properties
  • Added AccessibilityCheckingPeriod configuration file switch for improving the
    compatibility with AMD ULPS power saving technology on Crossfire systems. The
    switch allows low-level monitoring module to use AMD driver API to check GPU
    accessibility and detect and display GPU sleep state properly. Please take a
    note that AMD API implementation is ineffective and hardly suits to realtime
    monitoring due to high CPU stress resulting in periodic stuttering in games.
    That is why the compatibility switch is disabled by default, enable it only
    if you absolutely need to see slave GPU sleep state on the graphs and accept
    side effects like performance drop and stuttering resulting from ineffective
    AMD API implementation
  • Added NVIDIA GT240M PCI DeviceID range to the core to provide more efficient
    hardware monitoring via low-level core on mobile NVIDIA GT240 based systems
    (bonus feature, official mobile systems support is still not declared)
  • Graph limits are now adjustable in the graph properties in <Monitoring> tab
  • Added AMD RV810 graphics processors family supports
  • Added voltage control for custom design MSI R5670 1GB series graphics cards
    with uP6262 voltage regulators
  • Added voltage control for custom design MSI R5870 Lightning series graphics
    cards with uP6266 voltage regulators
    Added voltage control for custom design MSI R5870 Twin Frozr II series
  • graphics cards with uP6266 voltage regulators
  • Added voltage control for custom design MSI R5850 Twin Frozr II series
    graphics cards with uP6266 voltage regulators
  • Added integration with external MSI Kombustor stability testing application
  • Added workaround for overclocking bug of ForceWare 196.21. Please take a note
    that the workaround is applied only to 196.00 - 196.21 driver versions range
    in order to ensure compatibility with future fixed NVIDIA drivers.
  • Now hardware database includes marketing names of MSI graphics cards so MSI
  • Afterburner displays marketing names instead of generic graphics card model
    names when possible
Stahujte:
MSI Afterburne 1.5.0 Setup
(.zip; 4,2MB)
poluxtroj11
Začátečník
Začátečník
Registrován: 12. lis 2007
Bydliště: Dětmarovice

Re: MSI Afterburner - info a vše okolo

Příspěvek od poluxtroj11 »

Proč mě Afterbuner pustí jen na 1.3V?
kreatin
Nováček
Nováček
Registrován: 29. led 2009

Re: MSI Afterburner - info a vše okolo

Příspěvek od kreatin »

Mám otázku,při nastavení voltáže na 1.200V z (1.125V) a po zapnutí hry a nebo nějakého test. programu se mě přepne napětí na původní hodnotu.Dělá to normálně anebo se to musí někde nastavit-nebo to jenom potom špatně ukazuje ,ale to napětí tam je, graf.karta Nvidia GTX260
MB: Asus Rampage II Extreme, CPU: Core i7 920 D0 2.66@4312MHZ,CHladič:Noctua NH-D14,Pamět:6 GB 3x2 Corsair 1600Mhz 9-9-9-24-1T @1833Mhz,Geforce GTX 780 Phantom "GLH",zdoj: Flotron Everest 800W 12cm fan. 85Plus,
Odpovědět

Zpět na „Benchmarky a diagnostické programy“